Small waste liquid incinerator
Small waste liquid incinerator
Price
Small waste liquid incinerator
Manufacturer
Small waste liquid incinerator
Excellent quality
Use of small waste liquid incinerator
This incineration system can incinerate/process various waste liquids, wastewater, and solvents.
A brief description of the small waste liquid incinerator process
The incineration system mainly consists of the furnace body + heat exchanger + spray washing tower + connecting flue + exhaust fan + chimney + ignition and combustion system + compressed air system + The spray gun atomization system + oxygen supplementary air system + instrument control system, etc. form a complete set of incineration processes. The entire system is designed for negative pressure operation and is equipped with a negative pressure sensor D to automatically adjust and control the exhaust fan speed to ensure that the system negative pressure is maintained within the normal working range and is equipped with Exhaust fan failure chain protection This incineration and combustion-supporting system can use diesel, natural gas or waste solvent as auxiliary fuel. In the high-temperature area of incineration, brown fused alumina is used as a high-temperature and wear-resistant castable. This material has good thermal vibration stability, strong corrosion resistance, and small line changes. It has a long service life and a long-term use temperature of ℃. The high-temperature flue gas area uses high-temperature-resistant and wear-resistant castables made of high-temperature aluminum. The refractory lining is divided into a thermal insulation layer, a lightweight insulation layer, a temperature-resistant and wear-resistant insulation layer. The anchor adopts r.
Combustion is based on the principle of three + (temperature time vortex + air multiplication coefficient) in the furnace body through high-temperature pyrolysis combustion. The combustion temperature is controlled between ℃ and ℃, and the flue gas retention time is as high as waste solvent, waste water and waste. The toxic and harmful substances in the liquid are completely decomposed and destroyed. The waste liquid, waste solvent, and waste water spray gun uses a material gas-liquid mixing atomizer. The atomizer uses advanced fluid design concepts and a unique guide vane design inside the spray gun to make the spray particles uniform and fine. The low compressed air consumption saves customers operating costs. The larger nozzle holes are specially designed inside to effectively prevent clogging. The spray gun consumes less water and air than the fourth-generation atomizing spray gun, saving one-third of water per hour.
The high-temperature flue gas generated by the incineration is lowered to ℃ by the heat exchanger and then rapidly cooled to about ℃ by the spray scrubber to avoid the dioxin generation area. The acidic water-laden flue gas generated by the incineration is neutralized by the spray scrubber and then absorbed by the demister device. Finally, the dry flue gas reaches the standard and is discharged into the atmosphere through the exhaust fan.
The characteristics of the small waste liquid incinerator are as follows
) Adopts a new generation of stainless steel two-fluid mixing atomizer
) Environmentally friendly and safe and does not produce secondary pollution
) Easy to operate, simple and easy to learn and understand
br/>) Low failure rate, low maintenance and operation, long service life of the furnace body
) Good automatic control performance, high safety and efficiency, stable operation for a long time.
Sales Hotline
Technical Hotline
Sales Manager Tian Min
QQ
Want Want Account dzh
Address No. Kaiyuan Road North, High-tech Zone, Jining City, Shandong Province
Small liquid waste incinerator, small liquid waste incinerator price